Any Kit. Any Truck. Any Platform.

There is not a suspension system built that our technicians can't install. Ford, Ram, GM, Toyota, Jeep — leveling kit to long-travel. If it bolts to a truck, it goes on right the first time, here.

Banks Power Installs, Emissions Intact

Ram-Air intakes, Monster exhaust, oil pans, transmission pans and diff covers. Duramax, Cummins and Power Stroke.

Heat kills diesels, transmissions and gear oil. Banks builds parts that help your truck breathe better, run cooler and carry more fluid where it counts. We install them right here in Argyle, on the lift, torqued to spec, with the fluids filled the way they should be. Bought the parts yourself? Bring them in. We install customer-supplied parts and check fitment before anything goes on the truck.

Every job is quoted in writing before a wrench turns. We do not delete emissions equipment, and we never will.

Banks Parts We Install

Ram-Air Cold Air Intake

A sealed intake that feeds the turbo cooler, cleaner air than the factory box. Sharper throttle response and a better sound, and it bolts in without cutting anything.

Monster Exhaust

A full 5-inch system on the L5P Duramax that bolts on behind the factory emissions equipment. Lower exhaust temps, a deeper tone, and your DPF stays right where it belongs.

CoolRunner Oil Pan

A cast, finned engine oil pan built to pull heat out of the oil. Cooler oil lasts longer and protects the engine better when you are towing in a Texas summer.

Ram-Air Transmission Pan

For the 10-speed Allison. Cast aluminum with cooling fins inside and out, about three extra quarts of fluid, a magnetic drain plug and a temperature sensor port.

Ram-Air Differential Cover

A finned rear diff cover with a ram-air scoop that runs gear oil cooler than a flat stamped cover. A must if you tow heavy or run 35s and up.

Fluids Done Right

Every pan and cover gets fresh fluid to the right spec and the right fill level. Engine oil, transmission fluid and gear oil, so the new parts start their life on clean fluid.

Recent Build: 2024 GMC Sierra 2500 Denali HD

2024 GMC Sierra 2500 Denali HD Duramax with a full Banks Power build at LONESTAR LIFTED TRUCKS in Argyle TX

This Duramax Denali came in for the full treatment, with parts the owner supplied:

  • Banks Ram-Air cold air intake
  • Banks Monster Exhaust, full 5-inch system
  • Banks CoolRunner engine oil pan
  • Banks Ram-Air transmission pan for the 10-speed Allison
  • Banks Ram-Air differential cover
  • FOX 2.5 Performance Series shocks, all four corners
  • Toyo Open Country A/T III, 295/65R20, 10-ply
  • Full fluid service: engine, transmission and differential

It went out breathing better, running cooler and riding the way a Denali should. Emissions equipment untouched.

Common Questions

Do you install Banks parts I bought myself?

Yes. Bring the parts in and we install them, the same way we installed the full Banks build on the Denali shown on this page. We check the part numbers against your truck before it goes on the lift, and we quote the labor in writing first. Parts you supply carry the manufacturer warranty, and our workmanship is ours.

Will a Banks intake or exhaust affect my emissions equipment?

We do not delete emissions equipment, period. The Banks Monster Exhaust we install bolts on behind the factory emissions system, and your DPF, DEF and catalyst stay in place and working. If a part would require removing emissions equipment, we will tell you and we will not install it.

What does a Banks transmission pan or diff cover actually do?

Heat is what wears out transmission fluid and gear oil. A finned Banks pan or cover holds more fluid and sheds heat faster than the thin stamped factory part. On the 10-speed Allison, the Banks Ram-Air pan adds about three quarts. If you tow, haul or run big tires, that is cheap insurance.

Which trucks do you do Banks upgrades on?

Chevy Silverado and GMC Sierra HD with the Duramax, Ram HD with the Cummins, and Ford Super Duty with the Power Stroke. Gas trucks too, for intakes and exhaust. Tell us the year, engine and what you want, and we will confirm fitment before you buy anything.

How long does a Banks install take?

An intake or a diff cover is usually same-day. A full build like the Denali on this page, with intake, exhaust, oil pan, transmission pan and diff cover plus fluids, is typically a full day in the bay. We give you the time and the price in writing before we start.

Get It Quoted in Writing

Call the shop and we will itemize it — parts, labor, supplies, tax and fees — usually before you hang up.

PRICE LOCKThe price you approve is the price you pay. In writing, line by line, locked through pickup.Our Promise ›